Total GNSS antenna height includes your range pole, any accessory used to mount your antenna, and the antenna phase center. Here's how to calculate the value for Arrow and Skadi GNSS receivers.
Enter your total antenna height in the "GNSS Antenna Height" settings of the Eos Tools Pro app. Follow these steps with screenshots.
We recommend always setting your antenna height in Eos Tools Pro rather than your third-party data collection app. Do not set your antenna height in both apps, as this will drastically distort your elevation values.
The RX LED indicates if Eos Tools Pro is receiving location data from your Eos GNSS receiver. The TX LED indicates if Eos Tools Pro is transmitting GNSS corrections to your receiver when connected to an NTRIP correction.
First, to activate an Atlas subscription, you must have purchased one or obtained a trial. If you have not yet done this and would like to, contact our team. Once you have ...
First, make sure your mobile device has an internet connection, via either cellular or WiFi. Next, verify that your NTRIP IP (or URL address) and Port are entered correctly ..