To insert the battery pack into the Skadi handle (smart or standard), slide the battery into the slot with the LED fuel gauge facing out. To remove, press the two release flaps concurrently and pull the battery out.
The Skadi handle (smart or standard) slides into the empty battery compartment of your Skadi Series GNSS receiver.
To insert the battery pack into the Skadi receiver, slide the battery into the slot with the LEDs facing out. To remove, press the two release flaps concurrently and pull the battery out.
To power on/off your Skadi GNSS receiver, press and hold the side power button for 3 seconds. The LED panel will turn on/off.