Centimeter-Level Accurate GNSS Receiver with RTK Capability
The Arrow 200+® GNSS receiver is a robust, reliable, and repeatable RTK receiver. With support for all global GNSS constellations (GPS, Galileo, GLONASS, and BeiDou) and SBAS and RTK differential correction sources, this is one of our most accurate and productive receivers on the market. The Arrow 200+ balances performance and reliability with flexibility and affordability, making this one of the best-value RTK GNSS receivers in the world.
Accurate, Robust, Flexible
Survey-Grade GNSS Receiver
The Arrow 200+ delivers 1 cm accuracy to any device when connected to an RTK network or base station. For areas where no RTK network or base station is available, it can provide 30-60 cm accuracy with SBAS.
Productive Positioning
The Arrow 200+ is an extremely productive receiver, supporting all global GNSS constellations (GPS, GLONASS, Galileo, BeiDou), two frequencies (L1, L2) and 372 channels for unique and robust field productivity.
Full Flexibility
The Arrow 200+ GNSS receiver is compatible with all consumer mobile devices (iOS, Android, Windows) and any third-party data collection app, whether it be your current, future, or even proprietary mobile app.
Use with Many Differential Correction Sources
RTK Networks
The Arrow 200+ GNSS receiver provides 1-3 cm horizontal accuracy and 2-4 cm vertical accuracy with any RTK network, including public, private, free, and paid networks.
Base Stations & CORS
The Arrow 200+ will also work with any public or private base station or CORS network. Our team can help you locate the nearest base station no matter what your region.
SBAS
If no RTK or base station is available, the Arrow 200+ works with regionally available free SBAS corrections. Using SBAS will provide ~30 cm horizontal accuracy (HRMS).
Arrow 200+ Technical Specifications
GPS SENSOR
- Receiver Type: Dual-Frequency, Multi-Constellation GNSS RTK Receiver
- GPS Signals Received: L1CA, L1P, L1C, L2P, L2C
- GLONASS: G1, G2
- Galileo Signals Received: E1BC, E5b
- BeiDou Signals Received: B1i, B2i
- QZSS Signals Received: L1CA, L2C
- SBAS Channels: 3-Channel, Parallel Tracking (with SBAS Rangign)
- SBAS Support: WAAS (North America), EGNOS (Europe), MSAS (Japan), GAGAN (India), SouthPAN (Australia / New Zealand)
- Update Rate: 1 Hz Default
- RTK Accuracy: 8 mm1+ 1 ppm Horizontal, 2 cm1 + 1 ppm Vertical
- SBAS Accuracy: < 30 cm HRMS1, < 60 cm 2dRMS1
- Autonomous Accuracy: 1.2 meters HRMS1
- Cold Start: < 60 Seconds Typical (No Almanac or Time)
- Reacquisition: < 1 Second
- Maximum Speed: 1,850 kph (1,150 mph, 999 knots)
- Maximum Altitude: 18,288 meters, 60,000 ft
DEVICE COMPATIBILITY
- iPhone® and iPad®
- Android™ Smartphones and Tablets
- Windows®, Windows Mobile®
COMMUNICATION
- Port: Bluetooth®, USB 2.0, Serial
- Bluetooth Transmission: Class 1, 300 m Typical Range2 (up to 1 km)
- Bluetooth Frequency: 2,400 - 2,485 GHz
- Fully Bluetooth Pre-Qualified: Bluetooth 2.1 + EDR
- Supported Bluetooth Profiles: SPP, iAP
- Data I/O Protocol: NMEA 183, RTCM SC-104, Binary
- Autonomous Output Datum: WGS-84
- SBAS Output Datum: ITRF (Current Year Epoch)
- RTK Output Datum: Same as RTK Base
- Raw Measurement Data: Binary, RINEX
- Correction I/O Protocol: RTCM 2.x, 3.x, CMR, CMR+, Proprietary Binary
- GPS Status LEDs: Power, GNSS, DGNSS, DIFF, Bluetooth
- Battery Status LED: 5-LED Indicator
- Data I/O formats: NMEA 0183, RTCM SC-104, Binary
- Timing Output: 1PPS, CMOS, Active high, Rising Edge Sync, 10 kΩ, (w/Optional Serial Port) 10 pF Load
- Event Marker Input: CMOS, Active Low, Falling Edge Sync, 10 kΩ, (w/Optional Serial Port) 10 pF Load
POWER
- Battery Type: Field Replaceable, Rechargeable Lithium-Ion Pack
- Battery Autonomy: 14 Hours3
- Charging Time: 4 Hours
ENVIRONMENTAL DETAILS
- Battery Operating Temperature: -40°C to +85°C (-40°F to +185°F)3
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Humidity: 95 % Non-Condensing
- Compliance: FCC, CE, RoHS and Lead-Free
MECHANICAL DETAILS
- Enclosure Material: Xenoy®
- Enclosure Rating: Waterproof, Designed to Meet IP-67
- Immersion: 30 cm, 30 Minutes
- Dimensions: 12.5 cm x 8.4 cm x 4.2 cm (4.92" x 3.3" x 1.65)
- Weight: 372 g (0.82 lbs)
- Data Connectors: Mini USB Type B Receptacle
- Antenna Connector: SMA Female
ANTENNA DETAILS
- Impedance: 50 Ω (Ohms)
- Gain (no cable): 27 dB (± 2 dB)
- LNA Noise Figure at 25°C: 2.5 dB Typical
- Voltage: +2.5 to +16 VDC
- RF Connector: SMA Female
- Dimensions: 68 mm Diameter, 20 mm Height (2.7" Diameter x 0.8" Height)
- Weight: 170 g (0.37 lbs)
- Operating Temperature: -40°C to +85°C (-40°F to +185°F)
- Humidity: Waterproof
STANDARD ACCESSORIES (INCLUDED)
- GNSS Antenna
- Antenna Cable
- Antenna Mounting Plate
- Lithium-Ion Battery Pack (Field Replaceable)
- Pole Bracket and Clamp
- 12VDC Power Supply
- Hard Shell Carrying Case
- USB Cable
OPTIONAL ACTIVATIONS AND ACCESSORIES
- Output Rates: 10 Hz, 20 Hz, 50 Hz
- Spare Arrow Series® Battery Pack
- Vehicle Charger
GNSS Receiver Specification Footnotes:
- Depends on multipath environment, number of satellites in view, satellite geometry, baseline length (for local services) and ionospheric activities. Stated accuracies for baseline lengths of up to 50 km
- Transmission in free space
- Lithium-Ion battery performance degrades below -20°C (-4°F)
Resources for Current Arrow 200+ Customers
Get Started
Ready to get started with your new Arrow 200+ GNSS receiver? Follow along with this Arrow Quick Start Guide to power on, Bluetooth pair, and mount your Arrow 200+ GNSS receiver.
Check Your Firmware
The latest firmware for the Arrow 200+ is 6.1Aa01. Check your firmware in the Eos Tools Pro “About” menu, then check against your serial number. If your firmware is not current, contact our technical support team for upgrade instructions.
Browse Resources
A variety of informative articles, how-to guides, and video tutorials are available in the Eos Knowledge Base. Browse content to make sure you’re getting the most out of your GNSS receiver.